High Temperature Centrifugal Fan Φ630 | Aluminum Impeller and Rotor | ODM
High Temperature Centrifugal Fan Φ630  |   Aluminum Impeller and Rotor  | ODM
High Temperature Centrifugal Fan Φ630  |   Aluminum Impeller and Rotor  | ODM
High Temperature Centrifugal Fan Φ630  |   Aluminum Impeller and Rotor  | ODM
Model
B6D630-195M-180/105

Item specifics

Impeller Material
Aluminum
Rotor Material
Aluminum Casting
Protection Class
IP54
Insulation Class
F
Bearing
Ball Bearing

Review

Description

High Temperature Centrifugal Fan Φ630  |   Aluminum Impeller and Rotor  | ODM  FEATURES
Centrifugal Fans drawing
B6D630-195M-180/105             High Temperature Centrifugal Fan 

 Maintenance of centrifugal fan

(1) It must be confirmed that the centrifugal fan is in good condition before operation.

(2) Regularly remove ash, dirt and other impurities inside the centrifugal fan, and prevent rust.

(3) the lubricant should be replaced after each overhaul; Normal operation must be in accordance with the specified period of refueling.

(4) When the centrifugal fan is working, if there is any abnormal phenomenon, it must be stopped for inspection immediately. If there is a small fault, it should try to find out the cause and eliminate it. If there is a big fault, it should be stopped for inspection immediately.

PRODUCT DESCRIPTION
Voltage Input
AC  three-phase 
Voltage(V)
380
Power (W )
1150
Speed ( RPM )
950
DiameterΦ( mm )
630
Noise ( dB)
77
Temperature(°C)
-30℃/+60℃
Centrifugal Fans drawing
High Temperature Centrifugal Fan Φ630  |  Aluminum Impeller and Rotor |  Performance Parameters
Model selection
Type     
Voltage
V
Frequency
Hz 
Current
A
Input  Power W
Speed
RPM
Air Flow
m³/h
Noise
dB (A)
Net Weight kg
Curve
B6D630-195M-180/105
380 
50
3.0
1150
950
13000
78
30
Customize Advantage
advantage
FAQ
Q:   What Is our company product ?
A :   AC &EC &DC axial fan, centrifugal fan, shaded pole mothor.
Q:   How to order?
A :   Please send us your purchase order by Email or Fax, or you can ask us to send you Proforma Invoice for your order. We need to know the following information for your order:
1) Product information: Quantity, Specification ( voltage, input power, speed, airflow, working point, working temperature ), Artwork or Sample will be the best.
2) Delivery time required.
3) Shipping information: Company name, Address, Phone number, Destination seaport/airport.
4) Forwarder’s contact details if there is any in China.
Q:   How long and how to get sample from us ?
A :    1) If you need some sample to text, we can make as per your request, please provide us PDF or Al for Making. You should pay forthe transportation freight of samplesand sample cost (cost from USD30 to USD200, depend on the product), while the sample cost can be refundable if order is confirmed and QTY goes up to 500pcs.
2) Lead time for making sample:  about 7 days 
3) The transportation freight of samples: the freight depends on the weight and packing size and your area.
Q:   What advantages we have?
A :   Rich experience: We have more than 10 years experience in this industry. That means, we can preview the problems for the orders and products. Therefore, it will make sure to reduce the risk of bad situation to happen.
Point to point service: There is one sale who will serve you from inquiry to products shipped out.During the process, you just need to discuss with her for all problems and the way saves much time
Free design: If you are not ready for the designs, the professional designers will be able to help you with it freely.
Strict QC: For each order, strict inspection will be carried out by the QC department before shipping. The bad quality will be avoid within door.
Shipping: We have shipping department and forwarder, so we can promise faster delivery and make the goods well protected.