Industrial Centrifugal Fan Φ710 | Used In Condenser | Low Noise High efficiency | Customization
Industrial Centrifugal Fan Φ710  |  Used In Condenser  |  Low Noise High efficiency |  Customization
Industrial Centrifugal Fan Φ710  |  Used In Condenser  |  Low Noise High efficiency |  Customization
Industrial Centrifugal Fan Φ710  |  Used In Condenser  |  Low Noise High efficiency |  Customization
Model
Φ133 ~ Φ710

Item specifics

Impeller Material
Aluminum, Plastic or Magnalium
Rotor Material
Aluminum Casting
Protection Class
IP54
Insulation Class
F
Bearing
Ball Bearing

Review

Description

Industrial Centrifugal Fan Φ710  |  Used In Condenser  |  Customization FEATURES
B6D710-219M-180/105                            Industrial Centrifugal Fan

Maintenance of centrifugal fan

(1) It must be confirmed that the centrifugal fan is in good condition before operation.

(2) Regularly remove ash, dirt and other impurities inside the centrifugal fan, and prevent rust.

(3) the lubricant should be replaced after each overhaul; Normal operation must be in accordance with the specified period of refueling.

(4) When the centrifugal fan is working, if there is any abnormal phenomenon, it must be stopped for inspection immediately. If there is a small fault, it should try to find out the cause and eliminate it. If there is a big fault, it should be stopped for inspection immediately.

PRODUCT DESCRIPTION
Voltage Input
AC  three-phase 
Voltage(V)
380
Power (W )
1890
Speed ( RPM )
912
DiameterΦ( mm )
710
Noise ( dB)
82
Temperature(°C)
-30℃/+60℃
centrifugal fan drawing
Industrial Centrifugal Fan Φ710  |  Used In Condenser  | Customization  Performance  Parameters
Model selection
Type     
Voltage
V
Frequency
Hz 
Current
A
Input  Power W
Speed
RPM
Air Flow
m³/h
Noise
dB (A)
Net Weight kg
Curve
B6D710-219M-180/105
380 
50
3.8
1900
910
16000
83
32
Customize Advantage
centrifugal fan
FAQ
Q:   What Is our company product ?
A :   AC &EC &DC axial fan, centrifugal fan, shaded pole mothor.
Q:   How to order?
A :   Please send us your purchase order by Email or Fax, or you can ask us to send you Proforma Invoice for your order. We need to know the following information for your order:
1) Product information: Quantity, Specification ( voltage, input power, speed, airflow, working point, working temperature ), Artwork or Sample will be the best.
2) Delivery time required.
3) Shipping information: Company name, Address, Phone number, Destination seaport/airport.
4) Forwarder’s contact details if there is any in China.
Q:   How long and how to get sample from us ?
A :    1) If you need some sample to text, we can make as per your request, please provide us PDF or Al for Making. You should pay forthe transportation freight of samplesand sample cost (cost from USD30 to USD200, depend on the product), while the sample cost can be refundable if order is confirmed and QTY goes up to 500pcs.
2) Lead time for making sample:  about 7 days 
3) The transportation freight of samples: the freight depends on the weight and packing size and your area.
Q:   What advantages we have?
A :   Rich experience: We have more than 10 years experience in this industry. That means, we can preview the problems for the orders and products. Therefore, it will make sure to reduce the risk of bad situation to happen.
Point to point service: There is one sale who will serve you from inquiry to products shipped out.During the process, you just need to discuss with her for all problems and the way saves much time
Free design: If you are not ready for the designs, the professional designers will be able to help you with it freely.
Strict QC: For each order, strict inspection will be carried out by the QC department before shipping. The bad quality will be avoid within door.
Shipping: We have shipping department and forwarder, so we can promise faster delivery and make the goods well protected.